FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
B–62764EN/01
4. AUTOMATIC OPERATION
605
4 Press the REMOTE switch on the machine operators panel to enter
the
RMT mode, then press the cycle start switch. The selected file is
executed. For details on the
REMOTE switch, refer to the manual
supplied by the machine tool builder. The selected file number is
indicated at the upper right corner of the screen as an F number
(instead of an O number).
F0007 N00000
RMT
**** *** ***
13 : 27 : 54
FILE DIRECTORY
CURRENT SELECTED:O0040
PRGRM
(OPRT)
SCHDUL
Screen No.3
DIR
1 Display the list of files registered in the Floppy Cassette. The display
procedure is the same as in steps 1 and 2 for executing one file.
2 On screen No. 2, press the
[(OPRT)] and [SELECT] soft keys to
display “
SELECT FILE NO.
3 Enter file number 0, and press the [F SET], and [EXEC] soft keys.
SCHEDULE” is indicated after “CURRENT SELECTED:”.
4 Press the leftmost soft key (return menu key) and the
[SCHDUL] soft
key. Screen No. 4 appears.
F0000 N02000
MEM
**** *** ***
22 : 07 : 00
FILE DIRECTORY
ORDERFILE NO. REQ.REP CUR.REP
01
02
03
04
05
06
07
08
09
10
>_
PRGRM
DIR
Screen No.4
SCHDUL
(OPRT)
D Procedure for executing
the scheduling function

Leave a Reply

Your email address will not be published. Required fields are marked *