FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
4. AUTOMATIC OPERATION
B–62764EN/01
612
(a) INPUT UNIT : Handle interrupt move amount in input unit
system
Indicates the travel distance specified by handle
interruption according to the least input
increment.
(b) OUTPUT UNI : Handle interrupt move amount in output unit
system
Indicates the travel distance specified by handle
interruption according to the least command
increment.
(c) RELATIVE : Position in relative coordinate system
These values have no effect on the travel distance
specified by handle interruption.
(d) DISTANCE TO GO : The remaining travel distance in the current
block has no effect on the travel distance
specified by handle interruption.
The handle interrupt move amount is cleared when the manual reference
position return ends every axis.

Leave a Reply

Your email address will not be published. Required fields are marked *