FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
8. DATA INPUT/OUTPUT
B–62764EN/01
660
8
 
NC data is transferred between the NC and external input/output devices
such as the Handy File.
The following types of data can be entered and output :
1.Program
2.Offset data
3.Parameter
4.Pitch error compensation data
5.Custom macro common variable
Before an input/output device can be used, the input/output related
parameters must be set.
For how to set parameters, see III–2 “
OPERATIONAL DEVICES”.
FANUC
Handy File
RS-422
interface
RS-232-C
interface
RS–232–C or
RS–422 interface
(Punch panel etc...)

Leave a Reply

Your email address will not be published. Required fields are marked *