FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
B–62764EN/01
8. DATA INPUT/OUTPUT
683
The contents of the specified file number are read to the memory of NC.
Reading files
1 Press the EDIT switch on the machine operators panel.
For the two–path control, select the tool post for which a file is to be
input in memory with the tool post selection switch.
2 Press function key
PROG
.
3 Press the rightmost soft key
(next–menu key).
4 Press soft key [FLOPPY].
5 Press soft key
[(OPRT)].
6 Press soft key
[READ].
**** *** ***
11 : 55 : 04
READ
FILE NO. =
>_
EDIT
O0001 N00000
(METER) VOL
DIRECTORY (FLOPPY)
NO. FILE NAME
CAN
F SET
EXEC
PROGRAM NO. =
O SET
STOP
0001 PARAMETER
0002 O0001
0003 O0002
0004 O0010
0005 O0040
0006 O0050
0007 O0100
0008 O1000
0009 O9500
58.5
1.9
1.9
1.3
1.3
1.9
1.9
1.9
1.6
7 Enter a file number.
8 Press soft key
[F SET].
9 To modify the program number, enter the program number, then press
soft key
[O SET].
10 Press soft key
[EXEC]. The file number indicated in the lower–left
corner of the screen is automatically incremented by one.
11 Press soft key
[CAN] to return to the soft key display shown in
the screen of Fig. 8.8.1.(a).
8.8.2
Reading Files


Leave a Reply

Your email address will not be published. Required fields are marked *