FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
B–62764EN/01
8. DATA INPUT/OUTPUT
685
The file with the specified file number is deleted.
Deleting files
1 Press the EDIT switch on the machine operators panel.
2 Press function key
PROG
.
3 Press the rightmost soft key
(next–menu key).
4 Press soft key [FLOPPY].
5 Press soft key [(OPRT)].
6 Press soft key [DELETE].
EDIT
**** *** ***
11 : 55 : 51
DELETE
FILE NO. =
>_
O0001 N00000
(METER) VOL
DIRECTORY (FLOPPY)
NO. FILE NAME
CAN
F SET
EXEC
F NAME
NAME=
0001 PARAMETER
0002 O0001
0003 O0002
0004 O0010
0005 O0040
0006 O0050
0007 O0100
0008 O1000
0009 O9500
58.5
1.9
1.9
1.3
1.3
1.9
1.9
1.9
1.6
7 Specify the file to be deleted.
When specifying the file with a file number, type the number and
press soft key
[F SET]. When specifying the file with a file name,
type the name and press soft key
[F NAME].
8 Press soft key
[EXEC].
The file specified in the file number field is deleted. When a file is
deleted, the file numbers after the deleted file are each decremented
by one.
9 Press soft key
[CAN] to return to the soft key display shown in
the screen of Fig. 8.8.1(a).
8.8.4
Deleting Files


Leave a Reply

Your email address will not be published. Required fields are marked *