9. EDITING PROGRAMS
Another program can be inserted at an arbitrary position in the current
Fig. 9.6.4 Merging a program at a specified location
In Fig. 9.6.4, the program with program number XXXX is merged with the
program with program number YYYY. The OYYYY program remains
unchanged after merge operation.
Procedure for merging a program
1 Perform steps 1 to 5 in III–9.6.1.
2 Check that the screen for the program to be edited is selected and press
3 Move the cursor to the position at which another program is to be
inserted and press soft key
[’CRSR] or [BTTM’](in the latter case,
the end of the current program is displayed).
4 Enter the number of the program to be inserted (with only numeric
keys) and press the
5 Press soft key
The program with the number specified in step 4 is inserted before the
cursor positioned in step 3.
Merging a Program