FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62764EN/01
736
ACTUAL POSITION O1000 N10010
X
1
100.000
Y
1
200.000
Z
1
300.000
(ACTUAL SPEED)F : 0MM/MIN
S : 0RPM
(PARTS COUNT) 114
(RUN TIME) 5H 3M
(CYCLE TIME) 0H 0M 6S
O2000 N20010
X
2
400.000
Y
2
500.000
Z2 600.000
ALL
D Display with two–path control
(14CRT, 9.5 LCD)
(ACTUAL)
(ACTUAL)
(ACTUAL SPEED)F : 0MM/MIN
S : 0RPM
(PARTS COUNT) 114
(RUN TIME) 5H 3M
(CYCLE TIME) 0H 0M 6S
MEM STOP *** *** 12:34:56 HEAD1
ABS
REL
Bits 6 and 7 of parameter 3104 (DAL, DAC) can be used to select whether
the displayed values include tool length offset and cutter compensation.
On the 9 CRT, shared screen on the 14 CRT, or 9.5LCD, only the
coordinates for the first to fifth axes are displayed initially whenever when
there are six or more controlled axes. Pressing the
[ABS] soft key displays
the coordinates for the sixth and subsequent axes.
Explanations
D Display including
compensation values
D Displaying the sixth and
subsequent axes

Leave a Reply

Your email address will not be published. Required fields are marked *