FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62764EN/01
740
Displays the following positions on a screen : Current positions of the
tool in the workpiece coordinate system, relative coordinate system, and
machine coordinate system, and the remaining distance. The relative
coordinates can also be set on this screen. See III–11.1.2 for the
procedure.
Procedure for displaying overall position display screen
1 Press function key
POS
.
2 Press soft key
[ALL].
(RELATIVE)
X 246.912
Y 913.780
Z 1578.246
(ABSOLUTE)
X 123.456
Y 456.890
Z 789.123
(MACHINE)
X 0.000
Y 0.000
Z 0.000
(DISTANCE TO GO)
X 0.000
Y 0.000
Z 0.000
MEM **** *** *** 09:06:35
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [ OPRT ]
ACTUAL POSITION O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
D Display with one–path control
(RELATIVE)
X1 100.000
Y1 200.000
Z1 300.000
(ABSOLUTE)
X1 100.000
Y1 200.000
Z1 300.000
(MACHINE)
X1 100.000
Y1 200.000
Z1 300.000
(DISTANCE TO GO)
X1 000.000
Y1 000.000
Z1 000.000
Z2 000.000
MEM **** *** *** 09:06:35 HEAD1
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [(OPRT)]
ACTUAL POSITION O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
D Display with two–path control
(9CRT/PDP, 8.4 LCD)
11.1.3
Overall Position
Display
Procedure

Leave a Reply

Your email address will not be published. Required fields are marked *