FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62764EN/01
744
In the case of movement of rotary axis, the speed is displayed in units of
deg/min but is displayed on the screen in units of input system at that time.
For example, when the rotary axis moves at 50 deg/min, the following is
displayed: 0.50 INCH/M
The program check screen also displays the actual feedrate.
D Actual feedrate display
of rotary axis
D Actual feedrate display
on the other screen

Leave a Reply

Your email address will not be published. Required fields are marked *