FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
B–62764EN/01
11. SETTING AND DISPLAYING DATA
753
Displays the program currently being executed, current position of the
tool, and modal data in the MEMORY mode.
Procedure for displaying the program check screen
1 Press function key
PROG
.
2 Press chapter selection soft key
[CHECK].
The program currently being executed, current position of the tool,
and modal data are displayed.
O0010 ;
G92 G90 X100. Y200. Z50. ;
G00 X0 Y0 Z0 ;
G01 Z250. F1000 ;
(ABSOLUTE)(DIST TO GO) G00 G94
G80
X 0.000 X 0.000 G17 G21 G98
Y 0.000 Y 0.000 G90 G40 G50
Z 0.000 Z 0.000 G22 G49 G67
B
HM
TD
FS
> _ S 0 T0000
MEM STRT *** 16:05:59
[ PRGRM ][ CHECK ][ CURRNT ][ NEXT ][ (OPRT) ]
PROGRAM O2000 N00130
D Display with one–path control
O0010;
G92 G90 X100. Y200.0 Z50. ;
G00 X0 Y0 Z0 ;
G01 Z250. F1000 ;
(ABSOLUTE) (DIST TO GO) G00 G94 G80
X1 0.000 X1 0.000 G17 G21 G98
Y1 0.000 Y1 0.000 G90 G40 G50
Z1 0.000 Z1 0.000 G22 G49 G67
B
H M
T D
F S
MEM STRT *** 16:05:59 HEAD1
[ PRGRM ] [ CH ECK ] [ CURRNT ] [ NEXT ] [ (OPRT) ]
PROGRAM O2000 N00130
D Display with two–path control
(9CRT/PDP, 8.4 LCD)
11.2.4
Program Check Screen
Procedure

Leave a Reply

Your email address will not be published. Required fields are marked *