FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
B–62764EN/01
11. SETTING AND DISPLAYING DATA
755
The program check screen is not provided for 14–inch CRTs or 9.5–inch
LCDs. Press soft key
[PRGRM] to display the contents of the program
on the right half of the screen. The block currently being executed is
indicated by the cursor. The current position of the tool and modal data
are displayed on the left half of the screen.
Up to 18 modal G codes are displayed.
ACTUAL POSITION
(ABSOLUTE)
X 0.000
Y 0.000
Z 30.000
G00 G40 G54 F 500 M 3
G17 G43 G64
G90 G80 G69 H 5
G22 G90 G15 D T 9
G94 G50 G25
G21 G67 S 6000
SACT 0
O3001 N00000
F 0
ABS
REL ALL
PRGRM
NEXT (OPRT)
PROGRAM
O3001 ;
G40 ;
G49 M06 T9 ;
G0 G54 G90 X0 Y0 ;
G43 Z30. H5 S6000 M3 ;
M0 ;
X17.5 Y–22 ;
Z–6.5 ;
G10 P11 R0.995 F500 ;
M30 ;
%
>_
MEM **** *** *** 07:07:40
+
(MODAL)
MM/MIN
D  
9.5–inch LCD

Leave a Reply

Your email address will not be published. Required fields are marked *