FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62764EN/01
758
5 To calculate the machining times of additional programs, repeat the
above procedure. The machining time display screen displays the
executed main program numbers and their machining times
sequentially.
Note, that machining time data cannot be displayed for more than ten
main programs. When more than ten programs are executed, data for
the oldest programs is discarded. The screens below show how the
screen display changes from the initial state where the machining times
of ten main programs (O0020, O0040, ..., and O0200) are displayed
to the state where the machining time of the main program O0220 is
calculated.
PROGRAM (TIME) O0000 N00000
NO. TIME
O0020 12H48M01S
O0040 0H48M01S
O0060 4H16M01S
O0080 0H16M01S
O0100 1H20M01S
O0120 2H08M02S
O0140 2H32M01S
O0160 0H51M01S
O0180 15H04M01S
O0200 0H56M01S
>_
EDIT **** *** *** 16:52:13
[ TIME ][ ][ ][ ][(OPRT) ]
PROGRAM (TIME) O0000 N00000
NO. TIME
O0040 0H48M01S
O0060 4H16M01S
O0080 0H16M01S
O0100 1H20M01S
O0120 2H08M02S
O0140 2H32M01S
O0160 0H51M01S
O0180 15H04M01S
O0200 0H56M01S
O0220 0H03M01S
>_
EDIT **** *** *** 16:52:20
[ TIME ][ ][ ][ ][(OPRT) ]

Leave a Reply

Your email address will not be published. Required fields are marked *