FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62764EN/01
762
When the machining time inserted into a program is displayed on the
program directory screen and the comment after the program number
consists of only machining time data, the machining time is displayed in
both the program name display field and machining time display field.
If machining time data is inserted into a program as shown below, the
program directory screen does not display the data or displays only part
of the data.
EDIT *** *** *** *** 16:52:13
[
INS–TM ] [ ] [ ] [ ] [ ]
PROGRAM O0100 N00000
O0240 (SHAFT XSF301 MATERIAL=FC25)
(001H20M01S);
N10 G92 X100. Z10. ;
N20 S1500 M03 ;
N30 G00 X20.5 Z5. T0101 ;
N40 G01 Z–10. F25. ;
N50 G02 X16.5 Z–12. R2. ;
N60 G01 X40. ;
N70 X42. Z–13. ;
N80 Z–50. ;
N90 X44. Z–51. ;
PROGRAM DIRECTORY O0001 N00010
>_
EDIT **** *** *** 16:52:13
[ PRGRM ] [ DIR ] [ ] [ ] [ (OPRT) ]
Example 1 Program directory screen when a program name
longer than 16 characters
All characters after the first 16 characters of the
program comment are discarded and the machining time
display field is left blank.
PROGRAM (NUM.) MEMORY (CHAR.)
USED: 60 3321
FREE: 2 429
O0240 (SHAFT XSF301 ) : ( )
D Program directory

Leave a Reply

Your email address will not be published. Required fields are marked *