FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62764EN/01
768
In addition to the normal listing of the numbers and names of CNC
programs stored in memory, programs can be listed in units of groups,
according to the product to be machined, for example.
To assign CNC programs to the same group, assign names to those
programs, beginning each name with the same character string.
By searching through the program names for a specified character string,
the program numbers and names of all the programs having names
including that string are listed.
Procedure for Displaying a Program List for a Specified Group
1 Enter EDIT or background editing mode.
2 Press the
PROG
function key.
3 Press the
PROG
function key or [DIR] soft key to display the program
list.
PROGRAM (NUM.) MEMORY (CHAR.)
USED: 60 3321
FREE: 2 429
O0020 (GEAR–1000 MAIN)
O0040 (GEAR–1000 SUB–1)
O0060 (SHAFT–2000 MAIN)
O0100 (SHAFT–2000 SUB–1)
O0200 (GEAR–1000 SUB–2)
O1000 (FRANGE–3000 MAIN)
O2000 (GEAR–1000 SUB–3)
O3000 (SHAFT–2000 SUB–2)
> _
EDIT **** *** *** *** 16:52:13
[ PRGRM ] [ DIR ] [ ] [ ] [ (OPRT) ]
PROGRAM DIRECTORY O0001 N00010
4 Press the [(OPRT)] operation soft key.
5 Press the [GROUP] operation soft key.
6 Press the [NAME] operation soft key.
7 Enter the character string corresponding to the group for which a
search is to be made, using the MDI keys. No restrictions are imposed
on the length of a program name. Note, however, that search is made
based on only the first 32 characters.
Example: To search for those CNC programs having names that
begin with character string “GEAR–1000,” enter the
following:
>GEAR–1000*_
11.3.2
Displaying a Program
List for a Specified
Group

BG–EDT O–SRH GROUP
(NAME)
PR–GRP

Leave a Reply

Your email address will not be published. Required fields are marked *