FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62764EN/01
788
4 Enter necessary pattern data and press
INPUT
.
5 After entering all necessary data, enter the
MEMORY mode and press
the cycle start button to start machining.
HOLE PATTERN : Menu title
An optional character string can be displayed within 12 characters.
BOLE HOLE : Pattern name
An optional character string can be displayed within 10 characters.
The machine tool builder should program character strings of menu title
and pattern name by custom macro, and load them into the program
memory.
BOLT HOLE : Pattern data title
An optional character string can be displayed within 12 characters.
TOOL : Variable name
An optional character string can be displayed within 10 characters.
BOLT HOLE CIRCLE : Comment statement
An optional character string comment can be displayed up to 12
characters/line by 8 lines.
The machine tool builder should program the character strings of variable
name and comment statement by custom macro, and load them into the
program memory.
Explanations
D Explanation of the
pattern menu screen
D Explanation of the
pattern data screen

Leave a Reply

Your email address will not be published. Required fields are marked *