FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62764EN/01
796
7–4 Deleting a tool group
(1) In step 3, position the cusor on a group to be deleted and display the
editing screen.
(2) Press soft key
[DELETE].
(3) Press soft key
[GROUP].
(4) Press soft key
[EXEC].
7–5 Deleting tool data (T, H, or D code)
(1) Position the cursor on the data item (T, H, or D code) to be
deleted.
(2) Press soft key
[DELETE].
(3) Press soft key
[<CRSR>].
The line containing the cursor is deleted.
When a tool with mark @ (being used) is deleted, mark @ shifts to the
tool whose life has expired most recently or which has been skipped.
In this case, marks * and # are displayed in reverse video.
q
:
7–6 Skipping a tool
(1) Position the cursor on the data item (T, H, or D code) for the tool to
be skipped.
(2) Press soft key
[STATE].
(3) Press soft key
[SKIP].
7–7 Clearing the life count (resetting the life)
(1) Position the cursor on the data item (T, H, or D code) of the tool to be
cleared.
(2) Press soft key
[STATE].
(3) Press soft key
[CLEAR].
8 To complete the edit operation, press soft key
[END].
The tool life management screen is displayed again.

Leave a Reply

Your email address will not be published. Required fields are marked *