FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
B–62764EN/01
12. GRAPHICS FUNCTION
821
Coordinate axes and actual size dimension lines are displayed together
with the drawing so that actual size can be referenced.
The first six functions above (
1. to 6.) are available by setting the graphic
parameters. The seventh to ninth functions (
7. to 9.) are mainly executed
using soft keys after drawing has been setup. The tenth function (
10.) is
enabled by setting a parameter. The eleventh function (
11.) can be used
at any time.
Path drawing procedure
1 To draw a tool path, necessary data must be set beforehand.
So press the function button
GRAPH
some times (
CUSTOM
GRAPH
for the small
MDI).The “
PATH GRAPHIC (PARAMETER)” is displayed.
MDI
**** *** ***
14 : 25 : 07
PATH GRAPHIC (PARAMETER–1) O0000 N00002
AXES P=
(XY=0, YZ=1, ZY=2, XZ=3, XYZ=4, ZXY=5, 2P=6)
ANGLE
ROTATION A= 0
TILTING A= 0
SCALE K= 0.00
CENTER OR MAX./MIN.
X=130.000 Y= 110.000 Z= 50.000
I= 0.000 J= –10.000 K= 0.000
START SEQ. NO. N= 0
END SEQ. NO. N= 0
NO. A=
PARAM
POS
EXEC
SCALE
4
MDI
**** *** ***
14 : 25 : 51
PATH GRAPHIC (PARAMETER–2) O0000 N00001
TOOL. COMP P=
COLOR (0123456)
PATH P= 0
TOOL Q= 0
AUTO CHANGE R= 0
0
PARAM
POSEXEC SCALE
11. Displaying
coordinate axes and
actual size
dimensions lines
Procedure

Leave a Reply

Your email address will not be published. Required fields are marked *