FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
12. GRAPHICS FUNCTION
B–62764EN/01
824
15 To display a mark at the current tool position, display the PATH
GRAPHIC (POSITION)
screen by pressing soft key [POS] on the
PATH GRAPHIC (PARAMETER) screen of step 1 above. This
mark blinks at the current tool center position on the tool path.
14 : 27 : 47
PATH GRAPHIC (POSITION) O1126 N01126
Y
X
25.8
PARAM EXEC
SCALE
MDI
**** *** ***
POS
The relationship between the setting value and drawing screen is as shown
below:
Setting value Drawing screen
0 Plane view (XY)
1 Plane view (YZ)
2 Plane view (ZY)
3 Plane view (XZ)
4 Isometric projection (XYZ)
5 Isometric projection (ZXY)
6 Biplane view (XY,XZ)
The following coordinate systems are selected.
X
YZ
XY YZ
ZY XZ
X
YZ
Y
Z
P=0 P=1
P=2 P=3
Fig. 12.1(e) Coordinate systems for the plane view
Mark display
Explanations
D AXES
D Plane view (XY,YZ,ZY,XZ)

Leave a Reply

Your email address will not be published. Required fields are marked *