FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
13. HELP FUNCTION
B–62764EN/01
846
2 Press soft key [1 ALAM] on the HELP (INITIAL MENU) screen to
display detailed information about an alarm currently being
raised.
Normal explana–
tion on alarm
Fig.13(b) ALARM DETAIL Screen when Alarm P/S 027 is issued
Function
classification
Alarm details
Alarm No.
HELP (ALARM DETAIL) O0010 N00001
NUMBER : 027
M‘SAGE : NO AXES COMMANDED IN G43/G44
FUNCTION : TOOL LENGTH COMPENSATION C
ALARM :
IN TOOL LENGTH COMPENSATION TYPE C,
NO AXIS IS DESIGNATED IN G43 & G44
BLOCKS. IN TOOL LENGTH COMPENSATION
TYPE C, IT TRIES TO LATCH ON TO
ANOTHER AXIS WITHOUT OFFSET CANCE–
LING.
>100 S 0 T0000
MEM **** *** *** 10:12:25
[ 1 ALM ] [ 2 OPR ] [ 3 PARA ] [ ] [ ]
Note that only details of the alarm identified at the top of the screen
are displayed on the screen.
If the alarms are all reset while the help screen is displayed, the alarm
displayed on the
ALARM DETAIL screen is deleted, indicating that no
alarm is issued.
Fig.13(c) ALARM DETAIL Screen when No Alarm is issued
HELP (ALARM DETAIL) O1234 N00001
NUMBER :
M‘SAGE :
FUNCTION :
ALARM :
<<ALARM IS NOT GENERATED>>
ENTER THE DETAIL–REQUIRED ALARM NUMBER,
AND PRESS [SELECT] KEY
>100 S 0 T0000
MEM **** *** *** 10:12:25
[ 1 ALM ] [ 2 OPR ] [ 3 PARA ] [ ] [ ]
ALARM DETAIL screen

Leave a Reply

Your email address will not be published. Required fields are marked *