FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

PROGRAMMING
4. INTERPOLATION FUNCTIONS
B–62764EN/01
78
The skip function operates based on a high–speed skip signal (connected
directly to the NC; not via the PMC) instead of an ordinary skip signal.
In this case, up to eight signals can be input.
Delay and error of skip signal input is 0 – 2 msec at the NC side (not
considering those at the PMC side).
This high–speed skip signal input function keeps this value to 0.1 msec
or less, thus allowing high precision measurement.
For details, refer to the appropriate manual supplied from the machine
tool builder.
G31 IP_ ;
G31: One–shot G code (If is effective only in the block in which it is
specified)
IP
4.15
HIGH SPEED SKIP
SIGNAL (G31)
Format

Leave a Reply

Your email address will not be published. Required fields are marked *