Fanuc Symbol CAPi T Operators Manual

PROGRAMMING AND
OPERATION BY Symbolic FAPT
B–63304EN/02
3. EXECUTION OF
Symbolic FAPT
132
If either of the following soft keys is pressed, the corresponding data list
screen is displayed:
TOOL DATA : The tool data list is displayed.
TOLING INFOR. : The tooling information list is displayed.
(1)Setting the tool data
Press the TOOL DATA soft key.
List screen on which the tool data can be set
When the TOOL DATA soft key is pressed, the tool data list is
displayed. On the list screen, the tool data can be set, modified, or
deleted.
NOTE
When the tool DATA soft key is pressed on the machining
process list screen, the tool list screen shows the data of
turning tools. To set the data of a milling machining tool,
press the MILLING TOOL soft key.
When the TOOL DATA soft key is pressed on the tool data
setting screen of a process, the data of tools of the current
process is displayed.
If the current process is turning, the list of turning tools is
displayed. If the current process is Caxis machining or
Y–axis machining, the list of milling machining tools is
displayed.

Leave a Reply

Your email address will not be published. Required fields are marked *