Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
3. EXECUTION OF
Symbolic FAPT
PROGRAMMING AND
OPERATION BY Symbolic FAPT
141
[START]
Press this key to check the family program prepared anew.
In the
[ANIMATION]
state, you can simulate machining while
generating NC data preparation in the sequence of specification on the
process list.
Tool figures appear on the display, and you can visually check how
blank figures are cut.
Simulation by animation is not performed in the [ANIMATION] state.
NC data is generated in the sequence of specification on the process
list, and tool paths are displayed on the screen.
[REGISTER]
Press this key to register NC data in the machining memory while
checking the family program prepared anew.
In the
[ANIMATION]
state, you can simulate NC data while
generating the data in the sequence of specification on the process list.
Tool figures appear on the display, and you can visually check how
blank figures are cut.
In the [ANIMATION] state, NC data is prepared in the sequence of
specification on the process list, and tool paths are displayed on the
screen.
[DRAWNG RANGE]
Press this key to enlarge or scale down figures.
[PROC. LIST]
Press this key to display a list of machining periods and general
machining periods of each process.
[ESCAPE]
Press this key to return to Main Menu.
(1)Background animated simulation is supported only by the 1–path
lathe, not by the 2path lathe.
(2)Background animation drawing is valid only when the animated
simulation function (option) is provided.
(3)Chucks and tail stocks are not displayed.
(4)Only linear interpolation, arc interpolation, and threading are
simulated.
(5)Background animated simulation is not performed with the vertical
lathe.
(6)Background animated simulation is not performed when single
process output is selected.
(7)Blanks are not cut in the bar feed process, threading process, and
C–axis/Y–axis machining process.
(8)Tool pictures do not appear in the bar feed process.
(9)In the subcycle process, blank cutting, tool pictures, and tool paths
are not drawn on the screen.
3.5.2
Precautions to be
Taken with Background
Animated Simulation

Leave a Reply

Your email address will not be published. Required fields are marked *