Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
3. EXECUTION OF
Symbolic FAPT
PROGRAMMING AND
OPERATION BY Symbolic FAPT
163
NOTE
The interference check is performed only within the screen.
Meaning of SOFT KEY
[CHECK START] Depress with the start of the animated. . . . .
drawing function.
[ORIGINAL] Exit to a blank drawing before cutting.. . . . . . . .
[ACA] To use the function for automatically. . . . . . . . . . . . . .
avoiding collisions (option supported only
by 15TTFB), press the [ACA] soft key to
highlight it. Once the [CHECK START]
soft key is pressed. the [ACA] soft key is
disabled.
[TOOL PATH] When TOOL PATH is displayed in reverse. . . . . . .
video, the tool path is displayed.
[PARAMETER] Depress when setting parameters on. . . . . .
animated drawings.
[DRAWNG RANGE] Depress to enlarge or reduce shape.. .
[END] Exit to a Main Menu screen.. . . . . . . . . . . . . .
When bit 0 or 1 of system parameter 19 is set on, the operation of a vertical
lathe is simulated on the screen.

Leave a Reply

Your email address will not be published. Required fields are marked *