Fanuc Symbol CAPi T Operators Manual

PROGRAMMING AND
OPERATION BY Symbolic FAPT
B–63304EN/02
3. EXECUTION OF
Symbolic FAPT
172
754 Parameter for General Purpose Tools
This section covers the input/output procedure of graphic data (chuck
data, tail stock data, and tool holder data) for animation drawing function.
These data can be input to or output from a PPR and a bubble cassette in
the same way as in other data.
(1)Operation
1 Press DATA SET on the initial screen.
2 For the system asks you NO =, keyin 1 “INPUT”.
3 A menu of input/output for system data and setting is displayed.
For outputting graphic data, select No.15. For inputting graphic
data, select No.16. For collating graphic data, select No.17.
(Example 1) For outputting graphic data to PPR, key in
NO. = 15, P
INPUT
.
(Example 2) For inputting graphic data from a bubble cassette, key in
NO. = 16, B
INPUT
.
(Example 3) For collation between the graphic data and paper tape,
key in NO. = 17, P
INPUT
.
(2)Tape format
(a) Standard chuck
N6001 L1***
P L ; P W ; P L1 ; P W1 ;
No.
1: Outer claw
2: Inner claw
(b)Standard stock
N6001 L21**
P D ;
P D1
;
P D2
;
P D3
;
P L
;
P L1
;
P L2
;
No.
3.6.10
Input/Output of
Graphic Data

Leave a Reply

Your email address will not be published. Required fields are marked *