Fanuc Symbol CAPi T Operators Manual

PROGRAMMING AND
OPERATION BY Symbolic FAPT
B–63304EN/02
4. SUB CYCLE FUNCTION
180
WARNING
No check of the validity of a machining sequence is made.
Therefore, even when a machining sequence specified in
the machining definition includes any invalid process steps,
the entire machining sequence is reflected on the prepared
NC data. When defining machining, check the specified
machining sequence. Failure to specify a valid machining
sequence may result in the tool colliding with the workpiece
and/or machine, or forced machining occurring, possibly
causing damage to the machine and/or tool itself, or injury
to the user.
Sub cycle is displayed in soft key on the menu 4 “MACHINING
DEFINITION (kind of machining) screen when the following
conditions are satisfied:
D The sub cycle option is selected.
D MTF NO.1080 is not in the main and sub format.
The method of operation is as follows.
Kind of machining
screen
Sub cycle menu select
screen
Bring the cursor to the
process number, and depress
the soft key sub cycle
Menu number INPUT
Sub cycle data
pattern
Key-in at
each question
Depress [NEXT PAGE]
4.3
DEFINITION OF “SUB
CYCLE” PROCESS IN
DEFINITION OF
MACHINING

Leave a Reply

Your email address will not be published. Required fields are marked *