Fanuc Symbol CAPi T Operators Manual

PROGRAMMING AND
OPERATION BY Symbolic FAPT
B–63304EN/02
6. BALANCE CUT FAPT FUNCTION
(2–PATH LATHE ONLY)
194
(1)If system parameter 707 is set to 1 for a process, the BC = prompt
appears on the corresponding TOOL DATA setting screen displayed
by selecting 4 or machining definition from the menu.
If 1 is entered in response to the BC = prompt, the screen on which a tool
of the second turret can be set for balance cutting appears.
If 0 is entered in response to the BC = prompt, or if the tool of the second
turret is left undefined, balance cutting is not executed for the process.
6.2
SPECIFICATION
METHOD

Leave a Reply

Your email address will not be published. Required fields are marked *