Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
1. VARIOUS FUNCTIONS OF
Symbolic FAPT
VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
315
(b)The question appearing at the lower part of CRT is replaced with
the following expansion/contraction question.
DESIGNATE THE DRAWING RANGE
MAXX = MAX (123.45/67.89)
MIN (0.0/0.0)
The cursor flickers at the coordinate position indicated by MAX on
the CRT concurrently with the above question.
By depressing the [CURSOR FORWRD] or [CURSOR BACK]
key, this cursor shifts in the Xaxis direction.
[CURSOR FORWRD] Upward. . . .
[CURSOR BACK] Downward. . . . . .
Depress
INPUT
key when the cursor has reached the specified
position on the X–axis.
(c) The question at the lower part of the CRT is replaced with “MAXZ
=”, and the cursor shifts in the Zaxis direction.
[CURSOR FORWRD] Rightward. . . .
[CURSOR BACK] Leftward. . . . . .
The Zaxis position is determined by depressing the
INPUT
key.
(d)The question at the lower part of the CRT is replaced with “MINX
=”, and the cursor flickers at the coordinate position indicated by
MIN. (The cursor corresponding to MAX disappears.) Determine
the Xaxis position by shifting the cursor in the same manner as in
step (b).
(e) The question is replaced with MINZ =. Determine the Z–axis
position by the same operation as in (c).
(f) The question is reset to MAXX = in (b), and the cursor flickers
at the coordinate position indicated by MAX. Shift the cursor, if
correction of the cursor position is necessary.
(g)When the [EXEC] key is depressed, the question returns to the
original NO =, and an expanded or contracted graphic display
appears in the graphic display area specified by the cursor
positions. The [EXEC] key is effective for all questions in (b) to
(e).

Leave a Reply

Your email address will not be published. Required fields are marked *