Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
1. VARIOUS FUNCTIONS OF
Symbolic FAPT
VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
317
By this function, the calculation of NC data can be stopped each block or
each process and the output data can be confirmed or an optional NC data
can be inserted from the keyboard.
WARNING
Before starting machining based on the prepared NC data,
thoroughly check the contents of the NC data. Machining
with incorrect NC data may result in the tool colliding with the
workpiece and/or machine, or forced machining occurring,
possibly causing damage to the machine and/or tool itself,
or injury to the user.
If the [SINGLE ON] is displayed when producing NC data, processing
is stopped before outputting one block of NC data.
The contents of the block to be output are displayed in the second line as
viewed from the bottom of CRT screen.
The [SINGLE OFF] is displayed by depressing [SINGLE ON].
Also, the tool path is displayed when the block concerns the movement.
The following CRT screen shows the stopping state in the single step.
In this case, the following operation can be done.
(1)If the
INPUT
key only is depressed, data being displayed in the second
line as viewed from the bottom of CRT screen is output, and the
Symbolic FAPT returns to the execution to be ready for the next block.
(2)NC data can be output from the keyboard by optional blocks under this
condition. When the INPUT key only is depressed finally, the display
data in the second line as viewed from the bottom of CRT screen is
output.
(3)When
DEL
and
INPUT
keys are input, displayed data output can be
deleted.
(4)Input
SP SP,
INPUT
keys for outputting EOB code only.
AS a result, a space and EOB are output.
1.4
NC DATA OUTPUT BY
SINGLE STEP
1.4.1
Single Step of Block

Leave a Reply

Your email address will not be published. Required fields are marked *