Fanuc Symbol CAPi T Operators Manual

VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
B–63304EN/02
1. VARIOUS FUNCTIONS OF
Symbolic FAPT
322
WARNING
Before starting machining based on the prepared NC data,
thoroughly check the contents of the NC data. Machining
with incorrect NC data may result in the tool colliding with the
workpiece and/or machine, or forced machining occurring,
possibly causing damage to the machine and/or tool itself,
or injury to the user.
Output data from Symbolic FAPT can be output in main program and
subprogram formats by setting 2 to MTF No.1080.
(1)Output format
A main program is output first, and then, a subprogram called by the
main program is output. Subprograms are formed every input process,
and the main program sequentially calls these subprograms. Program
numbers with address 0 at the start of subprograms are sequentially
output one by one from main program number (operator input).
(Examples)
%
O0123
N0001M98P0124
M98P0125
M98P0126
M30
O0124
N0002G50X200000Z200000S20000
.
.
.
.
M01
M05
/M99
M30
O0125
N0003G50X200000Z200000S2000
.
. Second process subprogram
.
.
M30
O0126
N0004G50X200000Z200000S2000
.
.
.
. Third process subprogram
T0100
M01
M05
/M99
M30
%
Main program
First process subprogram
1.6
OUTPUT IN MAIN
PROGRAM AND
SUBPROGRAM
FORMAT

Leave a Reply

Your email address will not be published. Required fields are marked *