Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
1. VARIOUS FUNCTIONS OF
Symbolic FAPT
VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
323
(2)No.2000’s parameters referred
2100: Referred at the start of main program
2101: Referred at the end of main program
2102: Referred at the start of subprogram
FEED, 0_, etc.
2103: Referred at the end of subprogram
M99, M30, FEED, etc.
2104: Subprogram call block
M98P_
Initialization of above parameters.
2100: 0603 0004
program ;
number
2101: 0703 0004 0505 0004
Final Program
T code ; end M30 ;
output
2102: 0100 0603 0004
1x20: Program ;
feed number
2103: 0205 0004 0805 0204 0505 0004 0100
Spindle Sub– Block M30 1*20:
stop ; program end ; feed
M50 return with/
M code (optional
skip)
2104: 0705 0803 0004
Sub– P code
program ;
call
(3)No.2000’s parameters to be changed resultantly
Parameter
No.
Difference between new setting and standard setting
0300 0104 0004 0000 0000 0000 0000 0000 0000 0000
2000
Program number is not output (Program start).
0104 0004 0000 0000 0000 0000 0000 0000 0000 0000
2001
M05, final T code, M30, and feed output are discontinued, and %* only is output (at the end of program).
2002
0000 0000 0000 0000 0000 0000
to
2008
Feed output is discontinued (at the start of process).
2009
0003 0004 0000 0000 0000 0000
to
2015
M01 output is discontinued (at the end of process).
In the case of 4axis lathe specification, NC data of main
program/sub–program format can not be created.

Leave a Reply

Your email address will not be published. Required fields are marked *