Fanuc Symbol CAPi T Operators Manual

VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
B–63304EN/02
1. VARIOUS FUNCTIONS OF
Symbolic FAPT
342
22nd line: Character addresses 1554 to 1617
23rd line: Character addresses 1628 to 1691
24th line: Character addresses 1702 to 1765
(2)G codes for displaying figures
G code Function Argument G code type
G01 Draws a straight line. X, Y Modal
G02 Draws an arc clockwise. X, Y, I, J Modal
G03 Draws an arc
counterclockwise.
X, Y, I, J Modal
G204 Displays a rectangular frame. X, Y Single–shot
G206 Fill command. X, Y Single–shot
G240 Specifies a color. P Single–shot
G242 Sets a drawing start point. X, Y Single–shot
G243 Displays a character string. P, Character string Single–shot
G244 Specifies a line type. P Single–shot
G245 Character string display
mode.
P, Character string Modal
G246 Cancels the character string
display mode.
Single–shot
When these G codes and arguments are specified, no space must be
inserted.
1) G01 Draws a straight line.
G01X_Y_;
(Specify X and Y in incremental mode.)
X: 512 to 512, dot–based
Y: 384 to 384, dot–based
NOTE
An argument can be omitted. If an argument is omitted, it
is assumed to be 0. Note that, however, the X and Y
arguments cannot be omitted at the same time.
2) G02 Draws an arc clockwise.
G03 Draws an arc counterclockwise
G02/G03X_Y_I_J_;
(Specify X, Y, I, and J in incremental mode.)
X, I: 512 to 512, dot–based
Y, J: 384 to 384, dot–based
NOTE
An argument can be omitted. If an argument is omitted, it
is assumed to be 0. Note that, however, the X and Y
arguments cannot be omitted at the same time.

Leave a Reply

Your email address will not be published. Required fields are marked *