Fanuc Symbol CAPi T Operators Manual

VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
B–63304EN/02
1. VARIOUS FUNCTIONS OF
Symbolic FAPT
344
NOTE
1 If X or Y is not specified, the current coordinates are
assumed.
2 After the area is filled in, the coordinates immediately before
the specification of G206 are displayed again.
3 The area is filled in with the last color specified.
5) G240 Specifies a color.
G240P_;
Specifies the color of line segments and character strings. If a
negative value is specified for P, characters are displayed in reverse
video.
P = 1: Red, = 2: Green, = 3: Yellow, = 4: Blue,
= 5: Purple, = 6: Light blue,= 7: White
6) G242 Specifies a drawing start point.
G242X_Y_;
Specify a drawing start point with absolute values in the dot
coordinate system.
The next drawing starts at the specified point.
X: 0 to 512, dot–based
Y: 0 to 384, dot–based
7) G243 Displays a character string.
G243P_,
;
Character string (alphanumerics, , .)
P: Addresses 0 to 1997 at which the character string is to be
displayed
8) G244 Specifies a line type.
G244P_;
Specifies the line type of the straight line or arc to be drawn.
P= 0: Solid line
1: Dotted line
2: Dot–and–dash line
3: Double–dot–and–dash line
9) G245 Enters the character string display mode.
G246 Cancels the character string display mode.
G245 is the continuousstate form of the character string display
command (G243).
G245P_ , Character string
;
P_ , Character string
; Character string display mode
P_ , Character string
;
G246 ;

Leave a Reply

Your email address will not be published. Required fields are marked *