Fanuc Symbol CAPi T Operators Manual

VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
B–63304EN/02
1. VARIOUS FUNCTIONS OF
Symbolic FAPT
354
NOTE
The value of MTF1104 (the number of tool number digits)
should be used as the number of digits of the B code for
specifying the next tool.
(4)Example of output NC data block
The following NC data are prepared (when the NC data are prepared
for three processes).
0_ ;
G50X_ Z_ ;
G0X_ Z_ ;
(First process start)
B01 ; Tool number to be used in the first process. . . . . . . . . . . .
M06 ; Tool change. . . . . . . . . . . .
T0101 ; Tool compensation. . . . . . . . . .
B02 ; Tool number to be used in the next (second) process. . . . . . . . . . . .
G50X_ Z_ ;
.
.
T0100 ; Tool compensation cancel. . . . . . . . . .
(First process end)
(Second process start)
M06 ; Tool change. . . . . . . . . . . .
T0202 ; Tool compensation. . . . . . . . . .
B03 ; Tool number to be used in the next (third) process. . . . . . . . . . . .
G05X_ Z_ ;
.
T0200 ; Tool compensation cancel. . . . . . . . . .
(Second process end)
(Third process start)
M06 ; Tool change. . . . . . . . . . . .
T0303 ; Tool compensation. . . . . . . . . .
G05X_ Z_ ;
.
.
T0300 ; Tool compensation cancel. . . . . . . . . .
(Third process end)
CAUTION
1 For the first process, the tool number to be used in the
process is output before M06 (tool change).
2 For the last process, no next tool number is output.

Leave a Reply

Your email address will not be published. Required fields are marked *