Fanuc Symbol CAPi T Operators Manual

VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
B–63304EN/02
1. VARIOUS FUNCTIONS OF
Symbolic FAPT
356
4) Automatic process determination
The automatic process determination function selects 1 for the
machining type, not 2 (rigid tapping).
5) Animated simulation during NC data preparation
Animated simulation during NC data preparation is performed in
the same way as that for outputting a normal rigid tapping cycle.
(2)System parameter
To enable this function, set bit 7 of system parameter No. 706 to on.
Bit 7 of system parameter No. 706
0: Outputs a normal rigid tapping cycle.
1: Outputs an interpolation rigid tapping cycle.
(3)MTF
1) MTF1xxx
The following parameters have been added:
No. Format
Initial
value
Description
1351 Integer 68 C–axis clamping M code
1352 Integer 69 C–axis unclamping M code
1353 Integer 1 X–axis cutting direction for an interpolation rigid
tapping cycle
1354 Integer 2 Z–axis cutting direction for an interpolation rigid
tapping cycle
1383 Integer 384 G code for an interpolation rigid tapping cycle
1384 Integer 380 G code for canceling an interpolation rigid tapping
cycle
1398 Two
characters
FF Pitch command address for an interpolation rigid
tapping cycle
1399 Two
characters
TT Cutting direction command address for an
interpolation rigid tapping cycle

Leave a Reply

Your email address will not be published. Required fields are marked *