Fanuc Symbol CAPi T Operators Manual

VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
B–63304EN/02
2. CAUTIONS FOR USING
Symbolic FAPT
404
The tool path has been modified to be output to finish all specified range
including already finished parts in finish cutting and semifinish cutting,
if there is no interference with tool path. But can not specify the range that
all of them already finished.
A family program created in the 1path lathe mode cannot be read for use
in the 2path lathe mode.
WARNING
If an attempt is made to read and use, in the 2path lathe
mode, a family program created in the 1path lathe mode,
NC data is not created correctly.
If incorrect NC data is used in machining, the tool may
interfere with the workpiece or machine or behave
unnaturally, possibly leading to tool or machine breakage,
or injury.
2.12.4
Tool Path in Finish
Cutting and
Semi–finish Cutting
2.12.5
Cautions for Using the
2–path Lathe Mode

Leave a Reply

Your email address will not be published. Required fields are marked *