Fanuc Symbol CAPi T Operators Manual

C–AXIS FAPT FUNCTION
B–63304EN/02
1. PART FIGURE DEFINITION
(MENU 2)
410
Menu screen for Caxis Machining
Input Type No. (1 to 8) of the machined figure when Figure Type = is
questioned. Input the number: the graphic data input screen is selected.
NOTE
For the spindle position method (MTF 1306 = 1), the “2.
FACE GROOVE 1”, 6. SIDE GROOVE 2”, 7. FACE
MILLING” and 8. SIDE MILLING help diagram is not
displayed.
ESCAPE: Returns the mode to the program menu screen.
PART FIGURE: Displays the part figure definition screen for turning.
ALL DELETE: Deletes all data related to C axis figure already defined.
NEW: Press this key when cancelling the data as to C axis figure
already defined and defining C axis figure newly.
CHECK ALL: Draws the figure in accordance with the defined data.
CURSOR ° : Moves the cursor forward and backward.
CURSOR ±
NEXT PAGE: Selects the data setting screen as the place which the
cursor points to. Adjust the cursor to the place of the
undefined number and press this soft key. The display
will return to the program menu screen.
(1)When inserting:
No. FIGURE TYPE
01 FACE HOLE
02 SIDE HOLE
03 SIDE GROOVE 1
04
Normally, a new figure type is registered in No.04.
1) Press “CURSOR ± or “CURSOR ° to select the point to be
modified.
1.3
DESIGNATION OF
C–AXIS FIGURE
DATA
1.3.1
Inserting or Deleting
C–axis Figure Data

Leave a Reply

Your email address will not be published. Required fields are marked *