# Fanuc Symbol CAPi T Operators Manual

C–AXIS FAPT FUNCTION
B–63304EN/02
1. PART FIGURE DEFINITION
416
(5)Insert screen for the side face grooving
POSITION (ZAXIS) LZ = Position of groove (Z coordinate. . . .
value)
DEPTH DT = Depth of a groove. . . . . . . . . . . . . . .
GROOVING WIDTH WT = Diameter of a groove. . . .
GROOVING LENGTH ZG = Length of a groove. .
INTERVAL AB = When plural grooves are drilled,. . . . . . . . . . . .
set interval of grooves to be fixed
or variable.
(0: FIXED 1: VARIABLE)
QUANTITY AC = Number of grooves . . . . . . . . . . .
(in case of fixed interval, up to
100 holes can be specified.)
INITIAL ANGLE A1 = Position of groove (Angle. Angle. . . . . . .
of the first groove in case of plural
grooves)
ANGLE A2 = Angle of the 2nd groove . . . . . . . . . . . . . . .
(in case of variable interval)
A3 = Angle of the 3rd groove
(in case of variable interval)
A4 = Angle of the 4th groove
(in case of variable interval)
A5 = Angle of the 5th groove
(in case of variable interval)
FINAL ANGLE AE = Angle of the last groove when. . . . . . . .
plural grooves are drilled.