Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
1. PART FIGURE DEFINITION
(MENU 2)
C–AXIS FAPT FUNCTION
417
(6)Insert screen for the side face grooving
POSITION (ZAXIS) LZ = Position of groove . . . .
(Z coordinate value)
Other question are the same as for the end face grooving.
(7)Face Milling
X–C face view is drawn, and the element symbol request screen is
selected. As in the conventional figure input, here, define a figure,
using a symbolic keys.
The element symbols which can be entered include:
°, ±, ³, ², ½ , ¿, ½, ¿,
, , R, C
For the value of C in XC face view, input it in length (radius
designation), not in angle.
Input X value in diameter designation.
Example)
For the face milling figure in Fig.1, input as follows. Assume that
point A is the starting point:
³ Z=80
X0=50
C0=–25
CP=1
C=25
R R=5
± DX=–50
² C=–25
R R=5
° DX=50

Leave a Reply

Your email address will not be published. Required fields are marked *