C–AXIS FAPT FUNCTION
2. MACHINING DEFINITION
In menu 4 “Machining Definition”, press soft key “MILLING
When “MILLING MACHINING” button is pressed, the soft key for
selecting the kind of C–axis machining is displayed.
For the spindle positioning method (MTF 1306 = 1), the
FACE MILLING and CYLINDRICAL GROOVING software
keys are not displayed.
“C–AXIS C.DRIL” Press this key to perform C–axis center. . .
“C–AXIS DRILL” Press this key to perform C–axis drilling. . . . .
“C–AXIS TAP.” Press this key to perform C–axis tapping. . . . . . .
“C–AXIS GROOV.” Press this key to perform C–axis grooving.. .
“C–AXIS F.MILL” Press this key to perform face milling. . . .
“C–AXIS S.MILL” Press this key to perform side milling. . . .
“SUB CYCLE” Press this key to perform a sub cycle.. . . . . .
After entering tool data, check the entered data. Failure to
enter correct data may result in the tool colliding with the
workpiece and/or machine, possibly causing damage to the
machine and/or tool itself, or injury to the user.
After setting the type of machining, the setting screen of tools to be used
Kind of C–axis
Tool Data for C–axis