Fanuc Symbol CAPi T Operators Manual

C–AXIS FAPT FUNCTION
B–63304EN/02
2. MACHINING DEFINITION
(MENU 4)
434
(2)Drilling
TYPE 1
CLEARANCE C1 = Clearance 1 (mm or inch). . . . . . .
C2 = Clearance 2 (mm or inch)
DWELL ON/OFF DW =Specifies whether to perform. . . .
dwell at the bottom of the hole.
(0:Does not performs dwell, 1:
Performs dwell)
RPM N = Tool rotation speed (rpm). . . . . . . . . . . . . . .
FEED RATE FT = Feed amount per tool rotation. . . . . . . .
(mm/rev)
TYPE 2
CLEARANCE C1 = Clearance 1 (mm or inch). . . . . . .
C2 = Clearance 2 (mm or inch)
RETURN AMOUNT U = Return amount (mm or inch). .
DEPTH OF CUT D1 = Depth of cut (mm or inch). . . . .
RPM N = Tool rotation speed (rpm). . . . . . . . . . . . . . .
FEED RATE FT = Feed amount per tool rotation. . . . . . . .
(mm/rev)

Leave a Reply

Your email address will not be published. Required fields are marked *