Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
5. MTFC–AXIS FAPT FUNCTION
475
For both general tapping and rigid tapping processes, select the C–axis
tapping process. Whether general tapping or rigid tapping is to be
performed is set in the cutting conditions.
(1)Cutting conditions
In response to the prompt “TYPE”, set either 1 (general tapping) or 2
(rigid tapping).
(2)Examples of NC data output
TYPE 1: General tapping
G50X150.Z150.CO.
G00T0101
G97S0159M13
X50. (Warning 1)
Z2.
G98G84(G88)Z–13.R0.F239
C90.
C180
TYPE 2: Rigid tapping
G50X150.Z150.CO.
G00T0101
X50.
Z2.
G98G84(G88)Z–13.R0.M29
S0159M13F239.
C90. (Warning 2) (Warning 1)
C180
WARNING
1 An M code is output only for forward spindle rotation. So,
the value set in MTF No.1313 is output. In the above
example, MTF No.1313 is set to 13.
2 M code specifying the rigid mode. In the above example,
the value set in MTF No.1350 is output.
5.3
RIGID TAPPING NC
DATA INPUT

Leave a Reply

Your email address will not be published. Required fields are marked *