Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
SAFETY PRECAUTIONS
s3
2
GENERAL WARNINGS
WARNING
1. Before operating the machine, thoroughly check the entered data on the screen. Operating the
machine with incorrect data may result in the tool colliding with the workpiece and/or machine,
possibly causing damage to the machine and/or tool itself, or injury to the user.
2. When the tool offset function is used, before activating the machine, check the direction and
value of the offset to ensure that the tool will not collide with the workpiece or machine. Any
collision may cause damage to the tool and/or machine, or injury to the user.
3. Before starting the NC program prepared using the conversational function, thoroughly check
the contents of the NC data to ensure that the tool path and machining processes are set correctly,
and that the tool will not collide with the workpiece or machine (including the chuck and
tailstock). Before starting a production run, perform a dry run to ensure that the tool will not
collide with the workpiece or machine (including the chuck and tailstock). For example, start
the machining program without mounting a workpiece on the machine. Any collision may cause
damage to the tool and/or machine, or injury to the user.
4. Before using the conversational function to prepare a machining program, determine whether
the tool data, material data, setting data, system parameters, and MTF data are set as specified
by the machine tool builder. If these data values are not set appropriately, the cutting conditions
necessary for machining may not be set properly, possibly causing damage to the tool, or injury
to the user.

Leave a Reply

Your email address will not be published. Required fields are marked *