Fanuc Symbol CAPi T Operators Manual

PROGRAMMING AND
OPERATION BY Symbolic FAPT
B–63304EN/02
2. START OF Symbolic
FAPT PROGRAMMING
30
2
START OF Symbolic FAPT PROGRAMMING
CAUTION
After turning on the power, do not touch the keyboard until
the initial FAPT screen is displayed. Some keys are
specifically designed for maintenance or other special
operations; if any of these keys is pressed before the initial
screen is displayed, the machine may behave
unexpectedly.
The programming by Symbolic FAPT can be started by turning on the
power.
The initial screen is displayed 20 seconds after turning power on.
After the SYSTEM EDITION, the series/version number will be displayed.
Immediately after the series/version number, the language of the message
currently being displayed will be indicated in English.
Various jobs are selectable by depressing soft keys, while the initial pat-
tern appears on CRT screen.
Initial screen of
Symbol CAPi T
[FAPT EXEC] Depress this key for NC programming, while. . . .
monitoring the CRT screen.
[FAMILY PROGRAM] For calling a family program from. . .
submemory, floppy cassette or paper tape,
depress this key.
For using the memory cassette, the memory
cassette adapter is necessary.
For using the paper tape, FANUC PPR is
necessary.

Leave a Reply

Your email address will not be published. Required fields are marked *