Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
5. MTFC–AXIS FAPT FUNCTION
481
Example 1:
Cutting on the right of the element
N1 X134. :
N2 Z5. ;
N3 C52.063 ;
N4 G12.1 ;
N5 G1 X115.015 F78. ;
N6 X28.07 C55.769 ;
N7 X32.703 C64.974 ;
N8 G13.1 ;
N9 G0 Z150. ;
N10 X150. ;
2) MTF 1305 bit 0 = 1:
NC data is created using the cutter compensation start block MTF
2212, but cancel block MTF 2213 is also accessed. With standard
settings, NC data such as the following is created.
Example 2:
When cutting on the right of a defined shape, output the G code (G42)
set in cutter compensation start block MTF 1232 and the G code (G40)
set in cutter compensation cancel block.
N1 X134. :
N2 Z5. ;
N3 C45. ;
N4 G12.1 ;
N5 G1 G42 X100. F78. ;
N6 X0. C50. ;
N7 G40 C67. ;
N8 G13.1 ;
N9 G0Z150. ;
N10 X150. ;

Leave a Reply

Your email address will not be published. Required fields are marked *