Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
8. CAXIS FAPT FUNCTION BC–AXIS FAPT FUNCTION
505
(1)Selection the CAXIS machining process
By the CAXIS FAPT FUNCTION Boption, additional machining
processes of “C–AXIS REAMING”and “C–AXIS BORING”become
available.
Press the [MILLING] softkey in the kinds of machineng windows
of Menu 4.Then CAXIS machining processes appear on the
soft–keys at the bottom of the screen.With CAXIS FAPT
FUNCTION” option, additional machining processes of [C–AXIS
REAMER] and [CAXIS BORING] also appear on the soft–key.
C–AXIS
C.DRILL
C–AXIS
DRILL
C–AXIS
TAP.
C–AXIS
GROOV.
C–AXIS
F.MILL
C–AXIS
S.MILL
C–AXIS
REAMER
C–AXIS
BORING
[C–AXIS REAMER] Press to select CAXIS REAMING.. . . .
[C–AXIS BORING] Press to select CAXIS BORING.. . . . .
(2)Tool Data
Specify reamer for CAXIS REAMING or boring tool for C–AXIS
BORING both from milling tool list.
TURRET NO. TL=. . . . . . . . . .
TOOL SELECT NO. TN=. . . . .
TOOL OFFSET NO. TM=. . . . .
TOOL ID NO. ID=. . . . . . . . . .
When using a tool which has already been registered in the tooling
information file, simply specify the TOOL SELECT NO. (NT)
.Then the rest of the parameters are automatically filled in.
In case of new registration, specify the TOOL ID NO. (ID) .Then the
data of the tool registered in the tool data is read and set onto
appropriate parameters.Followings are the parameters displayed on
each tool data window for CAXIS REAMING tool and C–AXIS
BORING tool.
(REAMER)
TOOL TYPE TP;REAMER (M) . . . . . . . . . . .
TOOL MATERIAL MT;. . . . . .
TOOL DIAMETER DT=. . . . . .
CUT LENGTH LT=. . . . . . . . .
PECK DEPTH LE=. . . . . . . . . .
(BORING)
TOOL TYPE TP; BORING (M) . . . . . . . . . . .
TOOL MATERIAL MT;. . . . . .
TOOL DIAMETER DT=. . . . . .
CUT LENGTH LT=. . . . . . . . .
PECK DEPTH LE=. . . . . . . . . .
8.2.2
Machining Definition
(Menu 4)

Leave a Reply

Your email address will not be published. Required fields are marked *