Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
8. CAXIS FAPT FUNCTION BC–AXIS FAPT FUNCTION
515
NOTE
This command block is replaced by the next command block
in parentheses in parentheses when MTF 1342#1=1.
(Specify the shift value by the address word “I” and “K”.)
e. C–AXIS BORING type 2 (Not using Fixed Cycle)
(C–BORING) ;
N0004G28H0.;
G50X150.Z150.C0.;
G0T0202;
G97S1200M13;
X70.;
Z2.;
C45.;
Z–18.;
G1Z–33.F120.;.
G4U0.001;
M19;
X72.F240.;
Z–18.;
M13;
G0X70.C135.;
G1Z–33.F120.;
G4U0.001;
M19;
X72.F240.;
Z–18.;
M13;
G0X70.C225.;
G1Z–33.F120.;
G4U0.001;
M19;
X72.F240.;
Z–18.;
M13;
G0X70.C315.;
G1Z–33.F120.;
G4U0.001;
M19;
X72.F240.;
Z–18.;
M13;
G10Z2.;
Z150.;
:
:
² MTF2027 (Dwell) is referred to.
² MTF2031, 2032 (approaching in one axis at a time) is referred to.
² MTF2250 (Spindle orientation) is referred to.
² F=[Cutting Feed Rate] X [Value in system parameter No.396.]
² MTF2251 (Spindle restart) is referred to.
² MTF2017 (rapid traverse, cutting feed move command block) is referred to.

Leave a Reply

Your email address will not be published. Required fields are marked *