Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
8. CAXIS FAPT FUNCTION BC–AXIS FAPT FUNCTION
519
(3)Cutting condition parameters
No. Format Initial value Description Remarks
0390 Real
Number
2.(mm)
0.08(inch)
Clearance value for CAXIS REAMING (C1)
Unit: mm or inch
Note 1
0391 Real
Number
2.(mm)
0.08(inch)
Clearance value for CAXIS REAMING (C2)
Unit: mm or inch
Note 1
0392 Real
Number
5. Retracing feed rate override for CAXIS REAMING (1.0–10.0)
0393 Real
Number
2.(mm)
0.08(inch)
Clearance value for CAXIS BORING (C1)
Unit: mm or inch
Note 1
0394 Real
Number
2.(mm)
0.08(inch)
Clearance value for CAXIS BORING (C2)
Unit: mm or inch
Note 1
0395 Real
Number
0. Dwell time for CAXIS BORING
0396 Real
Number
2. Retracing feed rate override foe CAXIS BORING (1.0–10.0)
NOTE
When saved into the submemory, these data are stored in
appropriate place which corresponds to the current setting
of the increment system.
(4)System Parameters concerning Color Display
No. Format Initial value Description Remarks
0591 Integer 2 Color of the Machining path of CAXIS REAMING Green
0592 Integer 2 Color of the Machining path of CAXIS BORING Green
(1)Machine Tool File
No. Format Initial value Description
1304 0,1
designation
(8 bits)
00000011 Used fixed cycle or not. (for C/YAXIS only)
0 : Do not use
1: Use fixed cycle for corresponding process.
7 6 5 4 3 2 1 0Bit
Center Drilling
Drilling
C–AXIS Boring
1313 Integer –1 M–code for forward tool rotation
1314 Integer –1 M–code for reverse tool rotation
8.3.2
MTF Parameters

Leave a Reply

Your email address will not be published. Required fields are marked *