Fanuc Symbol CAPi T Operators Manual

Y–AXIS FAPT FUNCTION
B–63304EN/02
2. PART FIGURE DEFINITION
(MENU 2)
544
(6)Screen for specifying the positions of holes on a side face
Specify the following values:
PLANE (XAXIS): PDX=Position of the drilling plane (diameter)
DEPTH: DT = Hole depth
THREADING DIA: WT = Hole diameter
THROUGH HOLE: TH = 1 for a through hole, 0 for a blind hole
CENTER DRILL: CG = 1 for center drilling, 0 for other
machining
TAPPING: TA = 1 for tapping, 0 for other machining
HOLE QUANTITY: AC = Number of holes (Up to 6)
HOLE POSITION: Z1 = Position of the first hole (Z coordinate)
Y1 = Position of the first hole
(Y coordinate, radius)
Z2 = Position of the second hole
(Z coordinate)
Y2 = Position of the second hole
(Y coordinate, radius)

Leave a Reply

Your email address will not be published. Required fields are marked *