Fanuc Symbol CAPi T Operators Manual

B–63304EN/02
6. SYSTEM PARAMETERS
Y–AXIS FAPT FUNCTION
585
Parameter No. RemarksDescriptionInitial valueFormat
2.
mm specification
Clearance amount (C3) of Y–axis
0432 Real number
0.08
inch specification
drilling (machining method 3)
Unit: mm or inch
2.
mm specification
Cutting depth (D1) of Y–axis
0433 Real number
0.08
inch specification
drilling (machining method 3)
Unit: mm or inch
0434 Real number Undefined
Can’t use.
(Don’t change the data.)
2.
mm specification
Clearance amount (C1) of Y–axis
0435 Real number
0.08
inch specification
tapping
Unit: mm or inch
2.
mm specification
Clearance amount (C2) of Y–axis
0436 Real number
0.08
inch specification
drilling
Unit: mm or inch
2.
mm specification
Cutting depth (D1) of Y–axis
tapping (machining method 3:
0437 Real number
0.08
inch specification
Rigid tapping with pecking)
Unit: mm or inch
0438 Real number Undefined
Can’t use.
(Don’t change the data.)
2.
mm specification
Clearance (C1) of Yaxis pattern
0439 Real number
0.08
inch specification
machining (machining method 1)
Unit: mm or inch
2.
mm specification
Clearance (C2) of Yaxis pattern
0440 Real number
0.08
inch specification
machining (machining method 1)
Unit: mm or inch
2.
mm specification
Finishing allowance (TS) of
Y–axis pattern machining
0441 Real number
0.08
inch specification
(machining method 1)
Unit: mm or inch
0442 Integer 80
Cutting depth D1
(Percentage of the tool diameter)
0443 Real number Undefined
Can’t use.
(Don’t change the data.)
2.
mm specification
Clearance (C1) of Yaxis pattern
0444 Real number
0.08
inch specification
machining (machining method 2)
Unit: mm or inch
2.
mm specification
Clearance (C2) of Yaxis pattern
0445 Real number
0.08
inch specification
machining (machining method 2)
Unit: mm or inch
2.
mm specification
Finishing allowance (TS) of
Y–axis pattern machining
0446 Real number
0.08
inch specification
(machining method 2)
Unit: mm or inch
0447 Integer 80
Cutting depth D1
(Percentage of the tool diameter)

Leave a Reply

Your email address will not be published. Required fields are marked *