Fanuc Symbol CAPi T Operators Manual

Y–AXIS FAPT FUNCTION
B–63304EN/02
6. SYSTEM PARAMETERS
586
Parameter No. RemarksDescriptionInitial valueFormat
0448 Real number Undefined
Can’t use.
(Don’t change the data.)
2.
mm specification
Clearance (CD) in the
longitudinal direction of the tool
and clearance (C1) in the
0449 Real number
0.08
inch specification
circumferential direction of the
tool for Yaxis contouring
Unit: mm or inch
0.5
mm specification
Finishing allowance (TS) of
0450 Real number
0.02
inch specification
Y–axis contouring
Unit: mm or inch
0451 to 0459 Real number Undefined
Can’t use.
(Don’t change the data.)
e. System parameters related to color display (for Yaxis machining)
Standard setting value
Parameter No.
Value Color
Description
0570 2 Green Machining path of Yaxis machining (center drilling)
0571 2 Green Machining path of Yaxis machining (drilling)
0572 2 Green Machining path of Yaxis machining (tapping)
0573 2 Green Machining path of Yaxis machining (pattern machining)
0574 2 Green Machining path of Yaxis machining (contouring)
0575 to 0578 Undefined Undefined Not used
0579 6 Light blue Y–axis machining parts figure
f. Parameters related to animated simulation
Parameter No. Format Initial value Description Remarks
0733 Integer Undefind Value of the M code used for starting Yaxis machining
0734 Integer Undefind Value of the M code used for ending Yaxis machining
0771 Character Undefind Axis names and their order (Specify axis names in the
order in which they are programmed on the NC.
Example: XZCY)

Leave a Reply

Your email address will not be published. Required fields are marked *